RS232 Output IR Sensor with Optional Display
0
In Stock
This item is temporarily unavailable due to component issues - please see OS151-HT-K as a suggested replacement.
- -18 to 538°C (0 to 1000°F) Temperature Range
- Adjustable Emissivity from 0.1 to 1.0
- 5 Different Analog Output Models
- LED Display Model Available
OS101E-K-HT Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Operating Temprature range
Built in Display
Output
Process Temperature Range
Field of View
Accuracy @ Ambient
Laser Output
Emissivity
Cable Length
Supply Voltage
Spectral Response
Response Time
Communication Protocol
Intrisically Safe
- Housing Material Aluminum
- Maximum Ambient Humidity less than 95% RH, non-condensing
- Maximum Storage Temperature 50°C
- Minimum Storage Temperature 0°C
- Repeatability ±1% rdg
- Sensor Diameter 25.4 mm
- Sensor Length 63.5 mm
OMEGA’s OS100E Series miniature infrared sensors/transmitters measure a temperature range of -18 to 538°C (0 to 1000°F). They consist of a remotely mounted infrared sensor head connected to a high-performance, microprocessor-based signal conditioner. The miniature sensor head is ideal for measuring temperature in confined, hard-to-reach places and harsh environments. The sensor head is connected to the main electronics housing via a 1.8 m (6') shielded cable. The signal conditioner’s main electronics are mounted in a rugged NEMA 4 (IP65) rated die-cast aluminum housing. Model OS102E includes a built-in LED display that is switchable between °C and °F. Standard features include adjustable emissivity, field-adjustable alarm output, and RS232 PC interface. The unit has analog outputs such as 4 to 20 mA, 0/5 Vdc, 0/10 Vdc, 1 mV/degree, and Type K thermocouple.
Adjustable emissivity from 0.1 to 1 makes the OS100E Series suitable for a wide variety of different material surfaces. Applications such as asphalt, brass, brick, paints/lacquers and much more can be measured. Thermocouple outputs allow for easy convenient replacement of thermocouple contact sensors and don’t require external power source.
